I have lots of spare bits that I'd like to have accessible and organized by size/type. I'm thinking of some sort of wall mounted hook system, but am totally open to any ideas. I can't seem to find anything premade that I can purchase, which is my preference.
Any ideas and pictures you can share for how you do this?
Bit organization systems
Re: Bit organization systems
Google hook boards and you should find something - firend had something similar to this pic below when selling stock and it worked well.
![Image](http://www.retaildisplayconnections.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/s/i/single_prong_with_pos_arm.jpg)
![Image](http://www.retaildisplayconnections.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/s/i/single_prong_with_pos_arm.jpg)
Re: Bit organization systems
I hung small hooks about 5 inches below my tack room ceiling and hung individual bits on them. This ran a few feet and was almost decorative. Might not work if you have lots of bits.
Re: Bit organization systems
Have you checked out Lee Valley? They have so many options. Like:
![Image](http://www.leevalley.com/en/images/item/hardware/hooks/00s0350s1.jpg)
or
![Image](http://www.leevalley.com/en/images/item/hardware/kitchen/12k1702s2.jpg)
![Image](http://www.leevalley.com/en/images/item/hardware/hooks/00s0350s1.jpg)
or
![Image](http://www.leevalley.com/en/images/item/hardware/kitchen/12k1702s2.jpg)
Return to “Tack, Apparel, Facilities and Transportation”
Who is online
Users browsing this forum: No registered users and 6 guests